The MIP 67 error pop-up can appear on Android mobiles and tablets of any brand, from LG to Motorola and many others. In this article, we will define MIP 67, explain why the error occurs, and enumerate the different methods on how you can fix it. It does not matter if you are using Boost Mobile, Sprint service, or any other cellular network. The steps for troubleshooting and fixing the issue are the same.
What Is MIP 67 And The Reason Behind The Pop-Up Error
MIP 67 is a mobile mode authentication failed error that can pop up when your device fails to register with the Packet Data Serving Node (PDSN), a component of the carrier’s network. In other words, to put it simply, the MIP 67 error usually happens when your device is unable to access cellular services such as mobile data.
This pop-up error can occur because of varied reasons, including incorrect provisioning. There are times the MIP 67 error pops up when activating a new device with your same old SIM card and phone number. It can also pop up if you have a SIM card installed with no service and your mobile data is turned on.
How Can You Fix The MIP 67 Error?
There are different methods when it comes to fixing the MIP 67 error. We have searched far and wide to find out these methods for you. If you are somebody facing this issue on a device you want to use with Wi-Fi only, you can put your device on airplane mode to avoid the MIP 67 pop-up and normally use wireless Internet connectivity. Here are the methods should you want to fix the issue.
Method 1: Turn Off Mobile Data And Turn It On Again
Turning off your mobile data will certainly stop the pop-up since the device will not attempt to check for cellular services. The point here is to fix the error and issue, not just avoid the pop-up. Once you turn off your mobile data, please turn it on after a few seconds. If this method does not work, you can try removing and reinserting your SIM card.
Method 2: Restart Your Device
At times, restarting your device can fix the issue, and it only takes a few seconds to restart your device, so make sure you try this method. Most devices can be restarted by simply holding and pressing the power button for a few seconds and then tapping on the restart button. Once your device turns on again, hopefully, you will be able to access all the cellular services again and not see the pop-up error anymore.
Method 3: Change The Network Mode
Follow this procedure as you do this method.
Go to Settings > Connection > Mobile networks > Network mode > select LTE/CDMA.
Once you complete the previous step, proceed to Settings > General > System Updates > Update Profile.
If the wrong network mode were causing the issue, it would not pop up again (hopefully).
Method 4: Change The MSID (Mobile Station ID)
Using the wrong Mobile Station ID (MSID), also known as the Mobile Identification Number (MIN), can prevent your device from using its cellular services, which will eventually give rise to or trigger the MIP 67 authentication error.
This method involves contacting the customer support of your service provider and asking them for your MSID. Once you get it, follow the steps here.
- Open the dial app and dial ##847446#. Then, tap Edit.
- Enter the MSID provided by the customer support team of your service provider. Then, tap OK.
- Your handset will reboot, and you shall stop seeing the MIP 67 pop-up.
Method 5: Update Your Device’s Preferred Roaming List (PRL)
Preferred Roaming List (PRL) refers to the database stored on CDMA devices. It contains information used during the acquisition procedure. It is recommended that you occasionally update the PRL to receive excellent service. This method also works if you are dealing with the MIP 67 pop-up issue.
Take note. Before following the steps we will enumerate up next, you must ensure your device is connected to Wi-Fi. Here are the steps.
- Open Settings.
- Scroll down and tap Software update.
- Then, tap Update PRL.
- Once these are done, tap OK.
Or you may also follow these steps under this method. See below.
- Dial and call *228.
- Choose 2 to update your phone’s PRL.
After a couple of minutes, you should receive the confirmation message.
What If Nothing Works? What Should You Do?
Of course, we do not want to reach that point when nothing works. But if you have tried all the above methods and none of them fixes the issue, you can follow these alternative steps.
- Try dialing ##72786# with your phone. This will reboot your device and, in some cases, fix the MIP 67 error.
- Call the customer support team of your service provider to check if they have the right ESN and SIM number.
- As mentioned several times, MIP 67 occurs when your device fails to get mobile data. So, if your phone has a SIM card without any service plan, remove it. Additionally, you can also check for possible service outages in your area.
- If still, nothing works, a factory data reset may do the job. Factory resetting your device will restore it to its original state by erasing or deleting all your stored data. This is why it is highly recommended that you back up your data before resetting your phone. Keep this in mind.
- The last thing or alternative you can do is to use Wi-Fi. We understand this is not what most people want to do, but if none of the methods we outlined is working for you (which is very rare), you can remove the SIM card from your phone and connect to Wi-Fi.
Conclusion
The MIP 67 error is the pop-up error you get when your device is unable to connect to the Internet with the use of mobile data. The significant reasons behind this error are improper APN settings, outdated system software, network uses, and an invalid MSID. Follow the methods you learned about above to diagnose and fix the MIP 67 error on your gadget.
